To connect the codec to a Wi-Fi network access point:
- Press the HOME button to return to the Home screen, then tap Settings.
- Tap to select Transport Interfaces and then tap Wi-Fi.
- Ensure the Wi-Fi State is Enabled and tap Rescan Access Points if the required Wi-Fi network is not populated in the access point list.
- Tap to select the Wi-Fi access point to which you are connecting.
- Tap to select the preferred Authentication Mode and then tap Password to enter the network password.
- Enter the password, then tap Done in the top right-hand corner of the TOUCH SCREEN.
- Tap Connect in the top right-hand corner of the TOUCH SCREEN to connect to the Wi-Fi network.
- Verify the Wi-Fi symbol is visible in the Status Bar to confirm the codec has connected to the Wi-Fi access point.
Important Note: ViA supports IEEE 802.11 a/b/g/n Wi-Fi with dual band connectivity (2.4 and 5 GHz). For increased security Tieline has implemented the WPA2-PSK authentication protocol because standard WEP encryption is less secure