G3 (Commander/i-Mix)
Watch the video to learn how to create a cellular IP connection.
Fri, 10 Dec, 2021 at 10:57 AM
IMPORTANT NOTE: Wireless 3G UMTS/HSDPA modules purchased in the US for use on AT&T networks in the USA will not work on similar networks in other count...
Fri, 10 Dec, 2021 at 10:58 AM
Regardless if you have a new G3 codec or an older G1 legacy codec, simply navigate to [Menu] > [Unit Details]. Scroll through the LCD display to view...
Fri, 10 Dec, 2021 at 10:58 AM
IMPORTANT: We recommend you use either a LAN or serial connection when using ToolBox software with operating systems other than XP. Warning: Please remo...
Fri, 10 Dec, 2021 at 10:59 AM
For all ToolBox versions (excluding the Commander and Patriot G1 models) simply navigate to Help > about… to display the software version.
Fri, 10 Dec, 2021 at 10:59 AM
The ToolBox software must match the Firmware version in your codec to work properly. Both the Firmware version and the ToolBox version have what’s call...
Fri, 10 Dec, 2021 at 10:59 AM
Can I attach a high gain antenna to improve wireless 3G and 4G LTE cellular reception in marginal areas? If your cellular reception is marginal you can at...
Fri, 10 Dec, 2021 at 11:00 AM
Download the user manual under “Resources” for details about how to connect and control codecs using the TLG3 GUI software. In addition, you need to open po...
Wed, 8 Dec, 2021 at 8:47 AM
The message “Waiting” typically appears when the answering codec is set to mono and is in use, while the dialing codec is using the Dual Mono profile. The...
Fri, 10 Dec, 2021 at 11:00 AM
Note: Tieline codecs require firmware version 1.6.98 or higher to connect using the Tieline USB module and 4G LTE USB modems. Click to watch the video at ht...
Fri, 10 Dec, 2021 at 11:00 AM